|
Part No: STAN90000 |
| |
| Seta Oil Test
Centrifuge is a microprocessor controlled, heated centrifuge manufactured
exclusively for Seta by Hermle Labortechnik. The instrument is fully
programmable allowing automatic configuration to the specified oil test
parameters. |
| |
| |
A four
place swing out rotor and universal bucket assembly accommodates low cost
adaptors and cushions suitable for borosilicate glass centrifuge tubes of the
types specified for oil testing: 6 or 8 inch conical, 8 inch trace sediment or
8 inch pear-shaped. To reduce errors in measurement of tube content, the rotor
design allows tubes to stand in a near upright (vertical) position at
rest.
Speed, temperature, and timing are microprocessor controlled and
run parameters are entered via the panel controls and digital displays. Speed
can be specified and measured in either RPM (rotational speed) or RCF (relative
centrifugal force) mode and 9 run profiles can be stored in memory. The run
duration can be set between 1 and 60 minutes in one-minute increments, or set
for continuous operation. A Quick Run mode is also provided. The braking time
is programmable between 30 and 110 seconds.
A controlled isothermal band
heater holds the temperature between 30 and 70°C ±1°C, and is
programmed to compensate for friction heating effects during operation thus
ensuring correct sample temperatures throughout the test. A brushless
asynchronous motor ensures high reliability with low maintenance and the
centrifuge has in-built error messaging diagnostics.
SAFETY features
include a motor driven lid latch with a safety interlock to prevent centrifuge
operation while the lid is unlocked, imbalance detection, and over-temperature
protection for both the motor and the chamber. The centrifuge is almost silent
in operation with measured noise levels below 65 dB (A). Two types of trolleys
are available as optional accessories to allow easy movement of the instrument.
The centrifuge meets the requirements of EN 61010-2-020; DIN 58970
parts 1, 2 & 4; and UVV VBG 7z. |
|
|
 |
| |
 |
 |
| |
| |
 |
 |
Conforms to safety requirements |
|
|
Static, near vertical bucket positioning |
|
|
Heated chamber, ambient to 70°C |
|
|
Universal buckets for 6 and 8 inch glassware |
|
|
Optional ‘Setafuge’ Hazard Reduction System |
|
|
Microprocessor control with 9 memories |
|
| |
| |
 |
| API 2542, API 2548,
ASTM D1290, ASTM D1796, ASTM D1966, ASTM D2273, ASTM D2709, ASTM D2711, ASTM
D4007, ASTM D5546, ASTM D893, ASTM D91, ASTM D96 (obs), BS 2882 (obs), DIN 51
793, FTM 791 Methods 3000; 3003; 3004; 3101; 3121; 5661, IP 359, IP 75 (obs),
ISO 3734, ISO 9030, NF M07-020 |
| |
| |
| For full data sheets
and a written quotation please contact our Mindex office on
sales@mindex-ltd.co.uk including
your company name, telephone numbers and details of your product of
interest |
|
|
