'Mindex Ltd officially
represents Stanhope seta in Libya, Algeria, Nigeria, Ghana and Syria
Experts in the Supply of
Petroleum testing equipment and Laboratoy equipment across the globe
SETAFLASH SERIES 8
CLOSED CUP TESTER
Part No: STAN82000
The Setaflash Series
8 is an automated closed cup flash point tester with a temperature range of
ambient +5 to 300°C (ambient +9 to 572°F). The instrument uses an
electric hot wire ignitor (gas flame option).
There are two modes of
operation; Flash / No Flash and Ramp. The ramp mode increases the sample
temperature at a rate of 2°C/min, allowing determination of a flash point
in accordance with ASTM D7236 and IP 534. The dipping sequence occurs
automatically every 1°C up to 100°C (every 2°C rise above
100°C), until either a flash is detected or the end of test temperature is
reached. The ignitor uses a new electrical hotwire (a gas flame option is
available).
ASTM
D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 3900 Part A13, BS 6664 Parts 3
& 4, CHIPS Regulations, EPA 1020 A & B, IP 523, IP 524, IP 534, ISO
3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids
Ambient + 5°C to 300°C (Ambient +9°F to 572°F)
Small sample size, 2 or 4ml
Flash/No Flash & Ramp modes
Electric ignitor (gas available using optional accessory)
Automatic dipping and flash detection
Forced air cooling for rapid test cycling
64
Test memory & RS232 interface
°C or °F temperature display
For full data
sheets and a written quotation please contact our Mindex office on
sales@mindex-ltd.co.uk including
your company name, telephone numbers and details of your product of
interest
