|
|
|
|
Search
site |
|
| |
|
|
| |
|
|
 |
|
 |
|
| |
| Petroleum Testing |
|
|
|
A whole selection of
petroleum test equipment to ASTM standards. |
|
|
|
|
Portable Octane
analysers |
|
|
|
|
Chlorine analysers
& Sulfur analysers |
|
| Cement/Core PVT
Testing |
|
Core analysis,
petrophysics & rock mechanicss |
|
|
|
|
PVT, porrositmeters,
cement testing equipments |
|
|
|
|
Core flood analysis
equipments |
|
| Refinery analysers |
|
|
|
Specialising in on-line
analytical instrumentation for oil, gasindustries s |
|
| Scientific
Equipment |
|
|
|
Specialising in high precision viscometers, rheometers and
other scientific instruments |
|
|
|
|
|
|
|
|
Various specialist gas
generators |
|
|
|
|
UV spectrophotometers/
Microwave digestion/ spectrometers |
|
| Building
products |
|
|
|
Middle East agents for
bricks and paviours |
|
| Publications |
|
|
|
Global magazine/ periodical subscription
service |
|
| Health and
safety |
 |
Back supports |
|
|
Mindex Ltd back support reduce back injury in the
workplace |
|
| Petrochemicals |
|
|
|
Chemical marker for petroleum based
products. |
|
|
|
| |
| |
|
 |
| |
34000-0 Seta Multiflash
Automatic Flashpoint Tester - Universal Base Unit
The Seta Multiflash fully automatic flash point
tester is unique in covering the widest range of test methods. The instrument
is configured as a universal base unit with a choice of interchangeable modules
that implement Pensky-Martens (A and B), Abel, Cleveland, Tag, Small Scale
(Setaflash Rapid Equilibrium), and Equilibrium tests. Each module conforms to
the requirements of the appropriate test method and special emphasis has been
put on using water baths where these are mandated in test methods.
|
| |
Seta Multiflash - Pensky Martens
Flashpoint Tester Part Number 34100-2
Methods
ASTM D93, ASTM E502, BS 2000
Parts 34 & 404, DIN 51 758, EN ISO 2719, EPA 1010A, FTM 791 1102, GB/T 261,
IP 34, IP 404, ISO 15267, JIS K2265, NF
M07-019
The 34100-2 Pensky Martens module is used with the 34000-0
MultiFlash Universal Base unit. The module conforms precisely to national and
international Pensky-Martens Closed Cup standard test methods. It comprises a
heated cup and lid, and a DIPS pod (Dipping, Ignition, Pilot, Stirrer)
containing the ignitor dipping mechanism, the gas and electric ignitors and a
stirrer.
Interchanging the test module is straightforward and completed in
just a few minutes and the base unit recognises the module that is connected
and instantaneously sets up standard test parameters and calibration data..
|
| |
| |
 |
| |
|
Features
* Fully self-contained flash test
module
*
Exactly conforms to the requirement of test method
* Automatic set up of test parameters
* Gas or
electric ignition
* Automatic heating control, ignition & flash detection
* Automatic
test results & end of test audible warning
* Centigrade or Fahrenheit temperature
display
*
Automatic barometric correction
To download a full brochure in pdf format of this product please
click
here
|
| |
| |
Seta Multiflash - Abel Flashpoint
Tester Part Number 34200-0
Methods
BS 2000 Part 170, BS 3900 Parts A8 & A9, BS
6664 Parts 1 & 2, EN ISO 13736, IP 170, IP 304 (obs) Parts 1 and 2, IP 491,
IP 492, ISO 1523
The 34200-0 Abel module is used with the 34000-0 MultiFlash
Universal Base unit. The module conforms precisely to national and
international Abel test methods. It comprises a water/air bath, sample cup and
lid, temperature probes, flash detector, and a DIPS pod (Dipping, Ignition,
Pilot, Stirrer) containing the ignitor dipping mechanism with co-axial
gas/electric ignitor, and a stirrer. Interchanging the test module is
straightforward and completed in just a few minutes and the base unit
recognises the module that is connected and instantaneously sets up standard
test parameters and calibration data.
|
| |
 |
| |
Features
* Fully self-contained flash test
module
*
Exactly conforms to the requirement of test method
* Automatic set up of test parameters
* Gas or
electric ignition
* Automatic heating control, ignition & flash detection
* Automatic
test results & end of test audible warning
* Centigrade or Fahrenheit temperature
display
*
Automatic barometric correction
To download a full brochure in pdf format of this product please
click
here
|
| |
| |
Seta Multiflash - Cleveland Open
Cup Flashpoint Tester Part Number 34300-0
Methods
AASHTO T48, ASTM D92, BS 2000
Parts 36 & 403, DIN 51 376, EN ISO 2592, IP 36, JIS K2265, NF
T60-119
The 34300-0 Cleveland module is used with the 34000-0
MultiFlash Universal Base unit. The module conforms precisely to national and
international Cleveland open cup test methods.
It
comprises a sample cup, temperature probe, flash/fire detector, and a DIPS pod
(Sweeping, Ignition, Pilot, Stirrer) containing the ignitor sweeping mechanism
with co-axial gas/electric ignitor.
Interchanging the test module is straightforward and completed in
just a few minutes and the base unit recognises the module that is connected
and instantaneously sets up standard test parameters and calibration
data.
|
| |
 |
| |
Features
* Fully self-contained flash test
module
*
Exactly conforms to the requirement of test method
* Automatic set up of test parameters
* Gas or
electric ignition
* Automatic heating control, ignition & flash detection
* Automatic
test results & end of test audible warning
* Centigrade or Fahrenheit temperature
display
*
Automatic barometric correction
To download a full brochure in pdf format of this product please
click
here
|
| |
| |
Seta Multiflash - Tag Flashpoint
Tester Part Number 34400-0
Methods
ASTM D3934, ASTM D3941, ASTM D56, ASTM E502, FTM
791 1101, IP 304 (obs) Parts 1 and 2, IP 491, IP 492, ISO 1516, ISO 1523, JIS
K2265
The
34400-0 TAG module is used with the 34000-0 MultiFlash Universal Base unit.
The module conforms precisely to national and international TAG
closed cup test methods. It comprises a water bath, sample cup and lid,
temperature probes, flash detector, and a DIPS pod (Dipping, Ignition, Pilot,
Stirrer) containing the ignitor dipping mechanism with co-axial gas/electric
ignitor, and a stirrer.
Interchanging the test module is straightforward and
completed in just a few minutes and the base unit recognises the module that is
connected and instantaneously sets up standard test parameters and calibration
data..
|
| |
 |
| |
Features
* Fully self-contained flash test
module
*
Exactly conforms to the requirement of test method
* Automatic set up of test parameters
* Gas or
electric ignition
* Automatic heating control, ignition & flash detection
* Automatic
test results & end of test audible warning
* Centigrade or Fahrenheit temperature
display
*
Automatic barometric correction
To download a full brochure in pdf format of this product please
click
here
|
| |
 |
| |
| |
|
