|
Part No: CHAND-4265 |
| |
| Model 4265 provides
a determination of the strength development of a cement sample while it is
being cured under downhole temperature and pressure conditions. Cement strength
is interre by measuring the change in velocity of an ultrasonic signal
transmitted through the cement speciment as it hardens. As the strength of the
cement specimen increases, the ultrasonic signals transmit time through the
sample decreases. Using proprietary empirical algorithms that have been proven
thoughout the oil and gas industry , the relative strength can be
calculated. |
| |
| |
 |
 |
Every UCA system is fully tested to the maximum operating conditions in the
factory before shipment ensuring the instrument is completely operational |
|
|
PC based database of test results |
|
|
Autoclave units (Model 4265a) are compatible wit existing microprocessor
untis |
|
|
Retrofit kit available to convert existing units to PC based system |
|
|
Input voltage 220 VAC 50/60hz |
|
|
Cooling water 20-80 psi (600kPa) nominal flow 2 litres/min |
|
|
Operating temperatures 32-120 Deg F (0-50 deg c) |
|
| |
| |
